Flamingo Foam Cleaner F002 650ml – Multi-Purpose Deep Cleaning

What Is Flamingo Foam Cleaner For?

This product is for deep cleaning the inside of your car. Spray the foam onto fabric seats, upholstery, carpet, or vinyl surfaces — it works into the material, lifts out embedded dirt and stains, and wipes away cleanly without soaking the surface or leaving a residue.

Deep Cleaning Foam for the Whole Interior

Car interiors collect months of dust, food spills, sweat, and ground-in grime that surface wiping never really reaches. The foam goes deeper.

Lifts Stains, Dirt and Odour from Fabric

The foam penetrates fabric fibres and breaks down the staining and odour at the source, rather than just cleaning the surface layer. This is what makes it effective on older stains that ordinary wiping has failed to shift.

Works on Upholstery, Fabric, Carpet and Vinyl

Four surfaces, one product. Clean the fabric seats, then the carpet, then the vinyl dashboard trim and door cards, without switching products between each area.

One Product for Every Interior Surface

The multi-purpose formula is safe across all four surface types the label specifies — upholstery, fabric, carpet, and vinyl — which makes it the most practical interior cleaner to keep in the boot.

Foam Formula That Works Into the Fibres

Unlike liquid sprays that run and spread uncontrollably, the foam stays where you spray it and works into the fibres rather than pushing the dirt further in. This is particularly useful on vertical surfaces like seat backs and door panels.

Large 650ml Can for Full Interior Coverage

At 650ml this is a full-size can, not a trial size. There is enough product to clean a complete interior properly, or to do multiple cleans on the most-used surfaces.

Key Features of Flamingo Foam Cleaner

• 650ml (18.35 oz) aerosol can
• Multi-purpose and deep cleaning formula
• Works on upholstery, fabric, carpet and vinyl
• Foam penetrates fibres for deeper cleaning
• Lifts stains, dirt and odour
• Stays where sprayed, no uncontrolled running
• Integrated brush applicator nozzle
• Fast and effective, no soaking required

How to Use Flamingo Foam Cleaner

Shake the can well before use. Vacuum the surface first to remove loose dirt and debris. Hold the can upright and spray an even layer of foam onto the surface from a distance of around 15 to 20 cm. Use the built-in brush nozzle to work the foam into the fibres in a circular motion. Leave for 1 to 2 minutes, then wipe away with a clean dry cloth or microfibre. For stubborn stains, apply a second time and allow a longer dwell before wiping. Allow the surface to dry fully before use. Use in a ventilated area.

Safety Information

This is a pressurised aerosol product. Please read before use:

• Flammable — contents under pressure. Keep away from open flames, sparks, and any ignition source.
• Do not spray near heat or while smoking.
• Store below 50°C. Never leave the can inside a parked car in direct sunlight.
• Do not pierce or burn the can, even when empty.
• Use in a well-ventilated area and avoid breathing the spray directly.
• Keep out of reach of children.
• Read all cautions on the back panel of the can before use.

Flamingo Foam Cleaner Specifications

Buy Flamingo Foam Cleaner in Pakistan

Deep clean your car interior with Flamingo Foam Cleaner F002 650ml, available at Asad Autos Pakistan.